Planning Application Status

PL2022403




 / 

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary
PL2022403
LP Mart - Hamblen Rd Turn Lanes
Engineering Plan Review
Engineering Plan Review
Approved
11/17/2022
HD DEVELOPMENT OF MARYLAND INC
Locations
Contacts
HD DEVELOPMENT OF MARYLAND INC, Address:PO BOX 105842  
  
Reviews
Review Type Outcome Est. Completion Date Completed
Engineering Review No Comments 04/04/2023 04/04/2023
Sue Pyles, P.E.
Engineering Review Corrections 03/28/2023 03/28/2023
Sue Pyles, P.E.
Corrective Action Required
03/28/2023

Revise as follows: • Specify curb inlet size. • Include pavement section. • Include curb and gutter standard detail. • Include curb inlet standard detail.
Traffic Review No Comments 03/28/2023 03/28/2023
Brad Cooley, P.E., RSPI
Engineering Review Corrections 12/08/2022 12/08/2022
Sue Pyles, P.E.
Corrective Action Required
12/08/2022

Submit an Engineer's Estimate of Probable Construction Costs.
Corrective Action Required
12/08/2022

Include the pavement section design.
Corrective Action Required
12/08/2022

Include all applicable standard details.
Traffic Review Corrections 12/08/2022 11/30/2022
Brad Cooley, P.E., RSPI
Corrective Action Required
11/30/2022

Adjust the turn lane to be 100' and reduce the taper. The introductory taper should be a straight line, per the AMC.
Hearings

There are no hearings for this planning application.

Documents & Images
Date Uploaded File Type Document Name
11/22/2022 Plans HAMBLEN ROAD TURN LANE PLANS
12/08/2022 Letter DE-Comment Letter (Engineering Plans)
03/21/2023 Plans HAMBLEN ROAD PLANS
03/21/2023 Engineers Estimate COST ESTIMATE PUBLIC ROAD 2023-3-21
03/28/2023 Letter DE-Comment Letter (Engineering Plans)
03/28/2023 Plans HAMBLEN ROAD IMPROVEMENTS 3-28-2023
04/04/2023 Activity Document Fees PL2022403 LP Mart - Hamblen Rd Turn Lane
04/04/2023 Approved Plans LP Mart - Hamblen Turn Lane Approved 04 04 23
Upload Documents

Guidelines For Electronically Submitting Documents:

  • Submitted documents should be under 100MB in size.
  • Accepted file extensions:
    • pdf, jpg, xls, doc, xlsx, docx, dwg
  • All plans shall be to scale.
  • Recommended naming conventions:
    • Keep filename consistent.
    • Avoid the use of non-friendly filenames. (ex. k9dk38fj3.pdf)
    • Avoid inappropriate language in filenames.
  • Submitted documents will be stamped at the conclusion of the review.
    • The stamp will be placed in the upper right hand corner of the document. It is recommeded that this area, to the extent possible, be left blank so that no information is lost when the the stamp is applied.
Remember to click the Upload Document button. If you are applying for a New license, make sure to click the "next step" button after you have completed the upload of documents

Select any documents you wish to provide:





Portal Home