Permit Application Status

PRCOM20132484


In order to schedule inspections, you need to be signed in.

 / 

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary
PRCOM20132484
Building Permit - Commercial
Final Completion
CITIZENS UNION STATE BANK & TRUST
ALTERATION COMMERCIAL
ROOF MOUNTED PV SYSTEM - 14.5 KW SOLAR
11/11/2013
12/03/2013
05/19/2014
12/06/2013
Locations
Contacts
AMERICAN EAGLE ELECTRICAL SERVICES LLC, Address:909 NW 201ST RD, Phone:(660) 890-0790  
CITIZENS UNION STATE BANK & TRUST, Address:102 N SECOND ST  
BRIGHTERGY LLC, Address:1712 MAIN STREEET 6TH FLOOR, Phone:(816) 866-0555  
Reviews
Review Type Outcome Est. Completion Date Completed
Building Plan Review Approved 12/05/2013 11/26/2013
Mike Weisenborn
Misc
Resolved
11/26/2013

Solar panels and associated equipment are not allowed to extend above the parapet of the building. Details on the panels have not been provided. Action required - Provide information showing that the panels and equipment meet this requirement. Mike Weisenborn 11/26/2013 3:02 PM - Approved per Planning and Development.
Fire Plan Review Approved with Conditions 12/05/2013 11/26/2013
Mike Weisenborn
Misc
Corrective Action Required
11/26/2013

102.7 Subjects not regulated by this code. Where no applicable standards or requirements are set forth in this code, or are contained within other laws, codes, regulations, ordinances or bylaws adopted by the jurisdiction, compliance with applicable standards of the National Fire Protection Association or other nationally recognized fire safety standards, as approved, shall be deemed as prima facie evidence of compliance with the intent of this code. Nothing herein shall derogate from the authority of the fire code official to determine compliance with codes or standards for those activities or installations within the fire code official’s jurisdiction or responsibility. The currently adopted 2006 International Fire Code (IFC) does not address PV systems, but the 2012 IFC does and has been adopted and will take effect Jan. 1, 2014. The 2012 IFC is the reference document for this review.
Misc
Corrective Action Required
11/26/2013

605.3.1 Labeling. Doors into electrical control panel rooms shall be marked with a plainly visible and legible sign stating ELECTRICAL ROOM or similar approved wording. The disconnecting means for each service, feeder or branch circuit originating on a switchboard or panelboard shall be legibly and durably marked to indicate its purpose unless such purpose is clearly evident. Verified at inspection.
Building Plan Review Rejected 11/21/2013 11/20/2013
Mike Weisenborn
Misc
Corrective Action Required
11/20/2013

Solar panels and associated equipment are not allowed to extend above the parapet of the building. Details on the panels have not been provided. Action required - Provide information showing that the panels and equipment meet this requirement.
Fire Plan Review Approved with Conditions 11/21/2013 11/20/2013
Mike Weisenborn
Misc
Corrective Action Required
11/14/2013

102.7 Subjects not regulated by this code. Where no applicable standards or requirements are set forth in this code, or are contained within other laws, codes, regulations, ordinances or bylaws adopted by the jurisdiction, compliance with applicable standards of the National Fire Protection Association or other nationally recognized fire safety standards, as approved, shall be deemed as prima facie evidence of compliance with the intent of this code. Nothing herein shall derogate from the authority of the fire code official to determine compliance with codes or standards for those activities or installations within the fire code official’s jurisdiction or responsibility. The currently adopted 2006 International Fire Code (IFC) does not address PV systems, but the 2012 IFC does and has been adopted and will take effect Jan. 1, 2014. The 2012 IFC is the reference document for this review.
Misc
Corrective Action Required
11/14/2013

605.3.1 Labeling. Doors into electrical control panel rooms shall be marked with a plainly visible and legible sign stating ELECTRICAL ROOM or similar approved wording. The disconnecting means for each service, feeder or branch circuit originating on a switchboard or panelboard shall be legibly and durably marked to indicate its purpose unless such purpose is clearly evident. Verified at inspection.
Licensed Contractors Approved 11/21/2013 11/11/2013
Codes Admin
Fees
Paid Fees Amount Paid Owing Date Paid
9110078-Valuation Fee for Alteration to Commercial $46.19 $46.19 Paid 12/03/2013
$46.19
Outstanding Fees Amount Paid Owing Date Paid
No outstanding fees.
Totals: $46.19 $46.19 $0.00


$0.00
Inspections
Inspection Outcome Requested Scheduled Date Inspected
Electrical Service Inspection Passed 12/6/2013 12/6/2013 at 12:00 AM 12/06/2013
Underground Electrical Inspection - Commercial Passed 12/06/2013
Final Electrical Inspection - Commercial Passed 12/06/2013
Final Inspection - Commercial Passed 12/6/2013 at 12:00 AM 12/06/2013
Occupancy Inspection - Fire Passed 12/6/2013 at 12:00 AM 12/06/2013
Documents & Images
Date Uploaded File Type Document Name
11/19/2013 Letter Fire Building Plan Review
11/20/2013 Letter Codes Plan Review Conditions
11/26/2013 Letter Codes Plan Review Conditions
12/03/2013 Letter Codes Building Permit
12/06/2013 Letter Inspection Summary
Upload Documents

Guidelines For Electronically Submitting Documents:

  • Submitted documents should be under 100MB in size.
  • Accepted file extensions:
    • pdf, jpg, xls, doc, xlsx, docx, dwg
  • All plans shall be to scale.
  • Recommended naming conventions:
    • Keep filename consistent.
    • Avoid the use of non-friendly filenames. (ex. k9dk38fj3.pdf)
    • Avoid inappropriate language in filenames.
  • Submitted documents will be stamped at the conclusion of the review.
    • The stamp will be placed in the upper right hand corner of the document. It is recommeded that this area, to the extent possible, be left blank so that no information is lost when the the stamp is applied.
Remember to click the Upload Document button. If you are applying for a New permit, make sure to click the "next step" button after you have completed the upload of documents

Select any documents you wish to provide:





Portal Home