Permit Application Status

B9902591


In order to schedule inspections, you need to be signed in.

 / 

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary
B9902591
Building Permit - Commercial
Certificate of Occupancy
DACUR INVESTMENT COMPANY INC
ALTERATION COMMERCIAL
FITNESS CENTER REMODEL
12/07/1999
12/27/1999
06/24/2000
01/18/2002
Locations
Contacts
SUMMIT FITNESS, Address:178 NW OLDHAM PKWY  
DACUR INVESTMENT COMPANY INC, Address:2700 KENDALLWOOD PKWY # 208  
Reviews
Review Type Outcome Est. Completion Date Completed
Internal Plan Review (Res) Approved 06/04/2000 10/29/2010
Correction

Codes Administration- No merchandise, stock, interior furnishings or supplies shall be placed in this facility without approval from the City of Lee's Summit.
Correction

Codes Administration- Each structure shall have the address of that structure visibly posted on the jobsite throughout the construction process.
Correction

Codes Administration- It shall be the duty of the person doing the work authorized by a permit to notifiy the Building Inspections Division that such work is ready for inspection. (UBC Section 305.(c))
Correction

Codes Administration- A reinspection fee may be assessed for each inspection or reinspection when such portion of work for which inspection is called is not complete or when corrections called for are not made. ( UBC Section 305.(g))
Correction

Codes Administration- A reinspection fee may be assessed if an approved set of plans are not readily available to the inspector and the permit card is not posted at the time of the inspection. (UBC Section 305.(g))
Correction

Codes Administration- Exit doors shall be openable from the inside without the use of a key or special knowledge. (UBC Section 3304.(c))
Correction

Codes Administration- Except where fire tests have shown that fire dampers are not necessary to maintain the required fire resistance of the construction, fire dampers complying with the requirements of U.B.C. Standard No. 43-7 shall be installed and be readily accessible for servicing in the following locations: 1. Duct penetrations through area or occupancy separation walls. 2. Duct penetrations through horizontal exit walls. 3. Duct penetrations through shaft inclosures. 4. Duct penetrations of the ceiling of fire-resistive floor-ceiling or roof-ceiling assemblies shall be protected in accordance with Section 4305(b). 5. Duct penetrations through protective elements of fire-rated coridor walls. Such dampers shall be combination fire/smoke dampers conforming to UBC Standards Nos. 43-7 and 43-12 with a minimum leakage classification of III. 6. Ducts that are not a part of the smoke-control system, penetrating atrium walls or ceilings as defined in Section 1716(c). (1991 Uniform Building Code, Section 4306(j).)
Correction

All penetrations through fire resistive assemblies shall be protected by approved materials listed for such use.
Correction

The vapor barrier supplier shall specify required spacing of threaded rods used to support the tubes for the vapor barrier installation.
Correction

Codes Administration- Each single system providing heating or cooling air in excess of 2,000 cubic feet per minute in Group A, Divisions 1, 2 and 2.1; Group B, Division 2; Group E; Group I and Group R, Division 1 Occupancies shall be equipped with an automatic shutoff activated by smoke detectors. When the system serves more than one occupancy, automatic shutoff shall be provided. (1991 Uniform Mechanical Code, Section 1009.a.)
Correction

Codes Administration- Smoke detectors required by Subsection (a) shall be installed in the main return-air duct ahead of any outside-air inlet or they may be installed in each room or space served by the return-air duct. Detectors shall also be installed in the supply duct, downstream of the filters. Activation of any detector shall cause the air-moving equipment to automatically shut down. (1991 Uniform Mechanical Code, Section 1009.b.)
Fees
Paid Fees Amount Paid Owing Date Paid
24 BLDG Permit Fees $443.00 $443.00 Paid 12/27/1999
24 BLDG Plan Check Fees $27.35 $27.35 Paid 12/27/1999
25 Electrical Permit Fee $100.96 $100.96 Paid 12/27/1999
25 Mechanical Permit Fees $26.00 $26.00 Paid 12/27/1999
25 Plumbing Permit Fees $34.00 $34.00 Paid 12/27/1999
Outstanding Fees Amount Paid Owing Date Paid
No outstanding fees.
Totals: $631.31 $631.31 $0.00


$0.00
Inspections

There are no inspections for this permit application.

Documents & Images

No documents are currently available for viewing.

Upload Documents

Guidelines For Electronically Submitting Documents:

  • Submitted documents should be under 100MB in size.
  • Accepted file extensions:
    • pdf, jpg, xls, doc, xlsx, docx, dwg
  • All plans shall be to scale.
  • Recommended naming conventions:
    • Keep filename consistent.
    • Avoid the use of non-friendly filenames. (ex. k9dk38fj3.pdf)
    • Avoid inappropriate language in filenames.
  • Submitted documents will be stamped at the conclusion of the review.
    • The stamp will be placed in the upper right hand corner of the document. It is recommeded that this area, to the extent possible, be left blank so that no information is lost when the the stamp is applied.
Remember to click the Upload Document button. If you are applying for a New permit, make sure to click the "next step" button after you have completed the upload of documents

Select any documents you wish to provide:





Portal Home