Permit Application Status

B9800093


In order to schedule inspections, you need to be signed in.

 / 

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary
B9800093
Building Permit - Commercial
Certificate of Occupancy
JUNIOR COLLEGE DISTRICT OF
ALTERATION COMMERCIAL
REMODEL TOP FLOOR OF LEARNING RESOURCES BLDG
01/28/1998
02/24/1998
08/23/1998
10/01/1998
Locations
Contacts
FRANGKISER HUTCHENS INC, Address:11229 NALL SUITE 140  
JUNIOR COLLEGE DISTRICT OF, Address:3200 BROADWAY  
Reviews
Review Type Outcome Est. Completion Date Completed
Internal Plan Review (Res) Approved 08/05/1998 10/29/2010
Correction

Codes Administration- A reinspection fee may be assessed for each inspection or reinspection when such portion of work for which inspection is called is not complete or when corrections called for are not made. ( UBC Section 305.(g))
Correction

Codes Administration- A reinspection fee may be assessed if an approved set of plans are not readily available to the inspector and the permit card is not posted at the time of the inspection. (UBC Section 305.(g))
Correction

Codes Administration- Exit doors shall be openable from the inside without the use of a key or special knowledge. (UBC Section 3304.(c))
Correction

Codes Administration- When corridor walls are required to be one hour fire-resistive construction by Section 3305.(g), every interior door opening shall be protected by a tight-fitting smoke and draft control assembly having a fire-protective rating of not less than 20 minutes when tested in accordance with UBC Standard No. 43-2. Said doors shall not have louvers. The door and frame shall bear an approved label or other identification showing the rating thereof the name of the manufacturer and the identification of the service conducting the inspection of materials and workmanship at the factory during fabrication and assembly. Doors shall be maintained self-closing or shall be automatic closing by actuation of a smoke detector in accordance with Section 4306.(b). Smoke and draft control door assemblies shall be provided with a gasket installed so as to provide a seal where the door meets the stop on both sides and across the top. (UBC Section3305.(h))
Correction

The door hardware has not been designated at this time. The door hardware will be inspected in the field and will be required to comply with Section 3305(h).
Fees
Paid Fees Amount Paid Owing Date Paid
24 BLDG Permit Fees $563.00 $563.00 Paid 02/24/1998
25 Electrical Permit Fee $65.00 $65.00 Paid 02/24/1998
25 Mechanical Permit Fees $68.50 $68.50 Paid 02/24/1998
25 Plumbing Permit Fees $48.00 $48.00 Paid 02/24/1998
89 Sewer Tap Fees $60.00 $60.00 Paid 02/24/1998
Outstanding Fees Amount Paid Owing Date Paid
No outstanding fees.


$0.00
Inspections

There are no inspections for this permit application.

Documents & Images

No documents are currently available for viewing.

Upload Documents

Guidelines For Electronically Submitting Documents:

  • Submitted documents should be under 100MB in size.
  • Accepted file extensions:
    • pdf, jpg, xls, doc, xlsx, docx, dwg
  • All plans shall be to scale.
  • Recommended naming conventions:
    • Keep filename consistent.
    • Avoid the use of non-friendly filenames. (ex. k9dk38fj3.pdf)
    • Avoid inappropriate language in filenames.
  • Submitted documents will be stamped at the conclusion of the review.
    • The stamp will be placed in the upper right hand corner of the document. It is recommeded that this area, to the extent possible, be left blank so that no information is lost when the the stamp is applied.
Remember to click the Upload Document button. If you are applying for a New permit, make sure to click the "next step" button after you have completed the upload of documents

Select any documents you wish to provide:





Portal Home